T: 01334 477936 M: 07500 818141 alex@alexcustomfit.co.uk

SINGLE LENGTH IRONS

Wishon’s new single length iron design concept EQ1-NX offers same length and high COR low loft iron characteristics while adding many new performance enhancing features to mark a definite step forward in game improvement iron design.
Features:
  • Enabled by the new 2-piece hollow body design, the Center of Gravity moves progressively through the set from lowest and most rear located on the #5 iron to highest and most forward located on the GW and SW to achieve more consistent shot shape and shot height for each iron in the set
  • The hollow body design throughout the set increases the MOI of each head by removing all mass from the inside of the head to be distributed all around the CG.  The hollow body construction also enables the CG progression and uniform impact sound between the high COR and conventional COR heads in the set 
  • Low number irons are better matched with their loft to CG position to achieve preferred shot shape/height and allow a wider range of players to be able to effectively hit the #5 and 6 irons to fly and carry with proper distance gaps
  • Traditional GW and SW profile shapes are combined with milled faces and a custom sole grind make the wedges a great choice even if they were standalone wedges and not part of the single length design 
  • 275g head weight with hosel weight bore allows assembly to any single length between 35.5” and 37.5” while still being able to achieve a reasonable range of swingweight/MOI (depending on shaft weight and grip weight)
  •  

SINGLE LENGTH IRONS    £99 each

SINGLE LENGTH FAIRWAYS

The EQ1-NX Fairway Woods represent the most unique and versatile fairway wood design ever created through a greatly expanded internal weight addition capability to allow custom assembly to achieve a fairway wood single length or to be played at conventional fairway wood lengths.   



Features:

    • Each EQ-1-NX fairway wood head is produced with the ability to add up to a maximum of 30g to achieve normal swingweights at a 40” to 41”single length to complement the EQ1-NX single length irons and hybrids

    • Natural head weight spec of each EQ1-NX fairway wood head also allows assembly to conventional wood lengths of #3(42”-43”), #4(41.5”-42.5”), #5(41”-42”), #7(40”-41”).  Any length in between 40” and conventional fairway wood lengths is also capable for an even wider range of fitting options 

    • High COR thin high strength steel face design 

    • Available in #3(15*) #4(17*), #5(19*), #7(21*) in RH.  For single length use we recommend a set makeup of #3/#5 for better ball strikers or players with a driver clubhead speed over 95mph and a set makeup of #4/#7 for average players or any golfers with a driver clubhead speed under 95mph 

    • The four different weight bores allow for maintaining the best CG position low and center located, as well as to be able to increase the trajectory with the new twin rear sole weight bores  

    • Each EQ1-NX fairway is shipped with 2 x 6g and 2 x 9g weights included to make it more economical when building to match the EQ1 single length irons

    • The spec lie angle of 60* for each EQ1-NX fairway wood is created for assembly to the single length option between 40” and 41”. EQ1-NX fairway woods are capable of being bent up to 2° to allow proper lie fitting when assembled to conventional fairway wood lengths

SINGLE LENGTH FAIRWAYS  £169 each

SINGLE LENGTH HYBRIDS

The EQ1-NX Hybrids represent the most unique and versatile hybrid design ever created through a greatly expanded internal weight addition capability to allow custom assembly to match single length irons or to be played at conventional hybrid length.   



Features:

    • Each EQ-1-NX hybrid head is produced with the ability to add up to a maximum of 30g to achieve normal swingweights at 8-iron single length to match the EQ1-NX single length irons

    • Natural head weight specification of each EQ1-NX hybrid head also allows assembly to conventional hybrid lengths of #4(38”-39”), #5(37.5”-38.5”), #6(37”-38”).  Any length in between 8-iron and conventional hybrid lengths is also capable for an even wider range of fitting options

    • High strength steel, thin variable thickness face, high COR design.  0.335” bore to accept any S2S Hybrid shaft.  Though the EQ1-NX hybrid heads can be reamed to accept any 0.370” iron shaft, we recommend using an appropriate S2S graphite hybrid shaft when matching the EQ1-NX hybrids to the EQ1-NX irons in a full single length set makeup

    • Available in #4(20*), #5(24*), #6(28*) in RH to match the lofts and loft gaps of the EQ1-NX irons 

    • The four different weight bores allow for maintaining the best CG position low and center located, as well as to be able to increase the trajectory with the new twin rear sole weight bores 

    • Each EQ1-NX Hybrid is shipped with 2 x 6g and 2 x 9g weights included to make it more economical when building to match the EQ1 single length irons

    • Spec lie angle for each EQ1-NX hybrid is 63° to match the EQ1-NX single length irons.  EQ1-NX Hybrids are capable of being bent up to 3° to allow proper lie fitting when assembled to conventional hybrid lengths

SINGLE LENGTH HYBRIDS   £149each

Get in touch with Alex - Mobile 07500 818141 or email:

5 + 15 =

Subscribe To Alex Custom Fit News

Join our mailing list to receive the latest news and promotions from Alex Robertson.

You have Successfully Subscribed!